Impementasi Digital Twin Iot Untuk K3 Dalam Pemantauan Pembakaran Di Industri Manufaktur PT Perkebunan Nusantara IV Kota Tebing Tinggi

Evfy Septriani Ginting, Usaha Satria Pratama Tarigan, Armanda Prima


Abstract


Keselamatan dan Kesehatan Kerja (K3) menjadi aspek kritis dalam industri manufaktur, khususnya pada proses pembakaran kelapa sawit (Elaeis guineensis Jacq) yang berpotensi menimbulkan paparan gas berbahaya dan suhu tinggi. Penelitian ini mengimplementasikan konsep Digital Twin berbasis IoT untuk pemantauan pembakaran kelapa sawit (Elaeis guineensis Jacq) secara real-time di PT Perkebunan Nusantara IV, Tebing Tinggi. Sistem menggunakan sensor MQ-7 untuk mendeteksi kadar karbon monoksida (CO), sensor DHT22 untuk mengukur suhu, serta mikrokontroler ESP32 yang terhubung ke platform cloud untuk analisis dan visualisasi data. Data pengujian menunjukkan rata-rata kadar CO sebesar 10 ppm, masih di bawah Nilai Ambang Batas (NAB) 25 ppm, dan suhu rata-rata 31,5 °C, lebih rendah dari batas aman 35 °C sesuai rekomendasi NIOSH. Hasil ini menunjukkan bahwa implementasi Digital Twin IoT mampu meningkatkan pemantauan K3 melalui integrasi data real-time, analisis prediktif, dan simulasi risiko. Penelitian ini diharapkan menjadi langkah strategis menuju penerapan industri 4.0 yang berfokus pada keselamatan kerja dan efisiensi operasional

Keywords


Digital Twin, IoT, K3, pemantauan pembakaran kelapa sawit (Elaeis guineensis Jacq), industri manufaktur

Full Text:

PDF

References


BPJS Ketenagakerjaan. (2023). Statistik Kecelakaan Kerja Indonesia.

European Agency for Safety and Health at Work. (2020). Digital Solutions for Workplace Safety.

ILO. (2022). Global Trends on Occupational Accidents.

ILO. (2023). World Statistics on Occupational Safety and Health.

International Labour Organization (ILO). (2023). Safety and health at the heart of the future of work: Building on 100 years of experience.

Lin, Y., & Xu, X. (2020). Applications of Digital Twin in Manufacturing Systems. Procedia CIRP.

National Institute for Occupational Safety and Health (NIOSH). (2016). Criteria for a Recommended Standard: Occupational Exposure to Carbon Monoxide. U.S. Department of Health and Human Services.

NIOSH. (2016). Criteria for a Recommended Standard: Occupational Exposure to Heat and Hot Environments.

NIOSH. (2016). NIOSH Pocket Guide to Chemical Hazards.

NIOSH. (2023). Carbon Monoxide: Occupational Exposure Limits.

NIOSH. (2023). Recommended Heat Stress Standards.

Nurraihan, F. (2024). IoT for Industrial Safety and Process Optimization. Journal of Industrial Technology.

Nurraihan, F. (2025). The effectiveness of digital twin in reducing downtime in the manufacturing industry: A literature analysis. International Journal of Mechanical Computational and Manufacturing Research, 13(4), 113-121.

Permenaker No. 5 Tahun 2018 tentang Keselamatan dan Kesehatan Kerja Lingkungan Kerja.

Rahman, A., & Karim, F. (2020). Combustion Efficiency and CO Emissions. Journal of Energy Safety.

Tao, F., et al. (2023). Digital Twin and Industrial IoT: A Review of Trends and Future Directions. Journal of Manufacturing Systems.

Wang, L., & Li, Y. (2021). Variations in CO Emission During Industrial Combustion. Energy Reports.

Xie, W., et al. (2025). AIoT-powered building digital twin for smart firefighting and super real-time fire forecast. Advanced Engineering Informatics, 65, 103117.

Zhou, H., et al. (2022). Airflow Dynamics and Gas Concentration. Industrial Safety Journal...




DOI: https://doi.org/10.30743/best.v9i1.12884

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.