MENDETEKSI KERUSAKAN PAHAT PADA PEMESINAN BAJA AISI-1045 MENGGUNAKAN PAHAT POTONG BERLAPIS DAN TIDAK BERLAPIS

Muksin R. Harahap

Abstract


Umur pahat serta kondisi pemonitoran pahat dapat digunakan secara epektif pada proses pemotongan logam. Karena belum ada model matematika yang handal untuk pemotongan  logam yang dapat memprediksi kerusakan pahat, sehingga pengembangan sistem pemonitoran kondisi pahat sangat diinginkan industri. Tujuan penelitian ini adalah untuk pengembangan sistem pemonitoran kondisi dan deteksi pahat setiap saat pada proses pemesinan. Perubahangayapotong akan menjadi indikator yang penting untuk mendeteksi kegagalan pahat  dilakukan pada pemesinan kering baja AISI 1045 menggunakan karbida berlapis dan tak berlapis standard ISO P25. 


Full Text:

PDF

References


K. Jemielniak, Detection of cutting edge breakage in turning , Ann CRIP 41 (1992)

S.C. Dong, S.T. Jiang, Assesing quality performance based on the on-line sensor

measurement using neural networks, Comput. Ind. Eng. 42 (2002)

J. M. Zhou, M. Anderson, J. E. Stahl, Cutting tool fracture and strength evaluation by stress identification, part I, stress Modal, Int. J. Mach. Tools Manuf. 12 (1997)

S. K. Choudury, V. K. Jain, Ch. V. Rama Rao, on-line monitoring of tool wear in turning using aneural network, Int. J. Mach. Tools Manuf. 39 (1999)

Sr. Dimla, P. M. Lister, on-line mwtal cutting tool condition monitoring. I: Force and vibration analyses, Int. J. Mach. Tools Manuf, 40 (2000)

M. Belmonte, F.J. Oliveira, J. sacramento, A. J. S. Fernandes, R. F. Silva, Cutting forces evolution with tool wear in sintered hardmetal turning with CVD diamond, Diamond Relat. Mater. 13 (2004)

A. Ghasempoor, J. Jeswiet, T.N. Moore, Real time implementation of on-line tool condition monitoring in turning, Int. J. Mach. Tools Manuf. 39 (1999)

A. Boge, Arbeitshilfen und formeln fur das technische studium, Band 3, Freidr.Vieweg & sohn, 1989.

The Mathworks Inc, Using MATLAB Version 5.2, 1998.

G. H. Lim, tool wear monitoring in machine turning, J. Mater. Proces. Technol.51 (1995)


Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 PISTON (Jurnal Ilmiah Teknik Mesin Fakultas Teknik UISU)