Analysis Of The Effect Of Mass Variation On The Coefficient Of Friction On Wood

Clara Dwipuan Munthe, Aliyya Layyinatu Syifa, Bayu Setiaji

Abstract


The purpose of this study is to determine the coefficients of kinetic and static friction in order to identify areas where we can reduce unwanted friction, thereby enhancing the performance and efficiency of various devices or machines we use daily. This research employs a quantitative approach with an experimental design or practical activities conducted in a laboratory or controlled environment, where specific variables can be accurately measured. The collected data will be analyzed in numerical or statistical form. The values indicate that the kinetic friction coefficient between wood and wood is the smallest, at 0.14. The kinetic friction coefficient between metal and wood ranges from 0.28 to 0.30. This means that the kinetic friction force acting on a wooden block on a wooden surface is the smallest compared to other materials. The static friction coefficient between wood and wood is the highest, at 0.40. The static friction coefficient between metal and wood ranges from 0.23 to 0.32. This indicates that the static friction force required to initiate the movement of a metal object on a wooden surface varies depending on the mass of the metal.


Full Text:

PDF

References


Brown, H., & White, R. (2019). Molecular interactions at the interface and their impact on friction. Tribology International, 133, 284-290.

Gao, H., et al. (2022). Investigation on the Friction Coefficient and Wear Mechanism of Hybrid Bearings under Different Lubrication Conditions. Tribology International, 171, 107551.

Johnson, C., & Williams, D. (2016). Environmental influences on the friction coefficient of various materials. Wear, 364-365, 85-90.

Jonathan, G.; Cyrielle, G.; Véronique, C.; Do, M.T. Modelling of aircraft braking coefficient from IMAG friction measurements. In Proceedings of the Airports in Urban Networks, Paris, France, 15–16 April 2014.

Jones, M., Smith, L., & Brown, K. (2018). Surface modification techniques for reducing friction in mechanical systems. Surface Coatings Technology, 344, 142-148.

Kim, K. S., et al. (2018). The Effect of Graphene Oxide on the Friction and Wear Behavior of Lubricants. Wear, 396-397, 124-135

Liu, H.; Yang, B.; Wang, C.; Han, Y.; Liu, D. (2023). The mechanisms and applications of friction energy dissipation. Friction, 11, 839–864.

Li, S., et al. (2016). Friction and Wear Characteristics of a Lubricated Sliding Contact under Different Surface Textures. Tribology International, 94, 79-87.

Liu, Y.H.; Li, T.; Yang, Y.Y.; Ji, X.W.; Wu, J. (2017). Estimation of tire-road friction coefficient based on combined APF-IEKF and iteration algorithm. Mech. Syst. Signal Process, 88, 25–35.

Smith, J. A., & Jones, F. R. (2002). Adhesion and Friction on Polyethylene Surfaces. Journal of Adhesion Science and Technology, 16(12), 1553-1566

Véronique, C.; Gerthoffert, J.; Bouteldja, M.; Do, M.T. (2015). A modelling-based approach to relate ground friction measurements to aircraft braking performance. J. Aircr, 53, 1–11.

Zhang, X., et al. (2015). Influence of Surface Roughness on the Friction Coefficient during Metal Forming Processes. Journal of Manufacturing Processes, 20, 73-80.


Refbacks

  • There are currently no refbacks.


Dipublikasikan oleh:

Program Studi Pendidikan Fisika

Fakultas Keguruan dan Ilmu Pendidikan

Universitas Islam Sumatera Utara

E-mail: pascal@fkip.uisu.ac.id

Jl. Sisingamangaraja XII Teladan, Medan

 

 Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-NonKomersial 4.0 Internasional.